CHIAYO IrDA-9000 User Manual
Page 5
ISO 9001｜ISO 14001｜OHSAS 18001
-4-
UHF handheld transmitters（SQ-9000 IrDA(R)｜SQ-9000 IrDA｜SQ-8000 IrDA）
→SQ-9000 IrDA(R)｜SQ-9000 IrDA
→SQ-8000 IrDA
Parts and functions
SQ-9000 IrDA(R)
SQ-9000 IrDA
SQ-8000 IrDA
Cartridge
1
1
1
Battery power LED
2
2
2
Power switch
3
3
3
LCD
4
4
4
Menu button
5
5
8
Setting button
6
6
9
IrDA synchronizing button
7
7
5
Battery compartment
8
8
6
Color cap
9
9
-
IrDA sensor area
10
10
7
Charging port
11
-
10
GAIN control
-
-
11
Battery installation & indicator
This transmitter requires 2 x AA batteries to operate.
To install, remove the battery cover and slide the batteries according to the correct polarity into
the battery compartment & replace the battery cover.
Note: Batteries contain a corrosive acid that may leak and damage the transmitter when stored
for a long period. Batteries should be removed from the transmitter if it is not to be used for a
prolong period of about 4 weeks or more.
When the transmitter is switched ON a red LED will blink once to indicate the batteries
installed are in good condition. If the LED remains illuminated, it means the batteries are
weak and a replacement is required.
Channel synchronizing of the receiver and transmitter
1. For a trouble-free synchronization, please limit the distance between the receiver and
transmitter to within 30cm.
2. Align both sensor areas
3.
To change the receiver’s channel, please press the synchronizing button of the transmitter
and
will appear on the LCD. If the receiver
’s channel is synchronized,
will appear. Otherwise, please try again if the LCD shows
.
2
3
4
1
7
5 6
9
10 8