CHIAYO IrDA-9000 - Manual (Page 8)

-7-
GAIN setting (GT/MT)
Gain control enables the user to set different output levels. GT is for the use of instrument with
high impedance, such as guitar while MT is for the use of low impedance such as lapel or
headset microphones.
Other settings
1. Channel setting
Use MENU button to go to the CHANNEL page .
Pressing SET button will increase the channel number. The corresponding frequency will
change accordingly. 3 seconds after selecting a channel, it will be automatically saved.
2. Battery type setting
Use MENU button to go to the BATTERY TYPE page .
Press SET button to select either NiMH (rechargeable battery) or AKLN (alkaline battery). 3
seconds after selecting a battery type, it will be automatically saved.
Remark: NiMH battery must be selected when rechargeable battery is being used. Never select
AKLN (alkaline) when transmitter is intended for charging as alkaline battery isn
’t rechargeable.
Wrong battery selection will result in battery sensing electronics to display wrong and
misleading status information.
CHIAYO ELECTRONICS CO.,LTD.
Http://www.chiayo.com.tw｜Email: [email protected]
Office: 30, Lane 27, Section 4, Jen-Ai Road, Taipei 10685, Taiwan｜Tel: 886-2-27415741｜Fax: 886-2-27525242
Factory: 88, Chung-Hsiao Street 2, Chiayi 60080, Taiwan｜Tel: 886-5-2711000｜Fax: 886-5-5767611