Cloud Electronics CXA850 - Manual (Page 10)

8 CX-A850: Installation and Operation Manual
08-03-05 V4
18 Technical Specifications
Number of Channels Driven Rated Output 4 Ohm load(s) Rated Output 8 Ohm load(s)
1 62W 36W
2 58W 34W
3 54W 32W
4 50W 30W
5 47W 29W
6 44W 28W
7 41W 27W
8 38W 26W
Bridged Output 100W nominal into 8 Ohm load, minimum load 8 Ohms
Frequency Response +0dB –0.5dB 10Hz to 20kHz, switchable high pass filter –3dB
@65Hz
THD+N 0.007%, typical, @1kHz, 60W into 4 Ohms, one channel driven,
measurement BW 22Hz to 80kHz
VCA Module THD+N <0.03% 1kHz, measurement BW 22Hz to 80kHz
-85dB (relative to 60W) @1kHz with 4 Ohm load
-82dB (relative to 60W) @10kHz with 4 Ohm load
-90dB (relative to 30W) @1kHz with 8 Ohm load
Crosstalk
Typical, between adjacent
channels
-90dB (relative to 30W) @10kHz with 8 Ohm load
Input Sensitivity 0dBu (775mV)
Input Impedance 10k balanced / 5k unbalanced
Noise <96dB rms below rated output, unweighted, measurement BW
22Hz to 22kHz
Power Input 230V ±5% (115V ±5% available)
Fuse rating 230V – T4A H 115V – T8A H
Fuse type 20mm x 5mm class 3T 250V
This product conforms to the following European EMC Standards:
BS EN 55103-1:1997
BS EN 55103-2:1997
This product has been tested for use in commercial and light industrial environments. If the equipment
is used in controlled EMC environments, the urban outdoors, heavy industrial environments or close to
railways, transmitters, overhead power lines etc. the performance of the unit may be degraded.
The product conforms to the following European electrical safety standard.
BS EN 60065:1998