Compuprint 9060LA Programmer Manual - Manual (Page 41)

39
Function Command
Vertical Control (cont.)
Advance paper n/180 inch (1 < n < 255) ESC J (n)
Set line spacing to 1/8 inch ESC 0
Set line spacing to n/180 inch (1 < n < 255) ESC 3 (n)
Set line spacing to n/60 inch (1 < n < 127) ESC A (n)
Set line spacing to 1/6 inch ESC 2
Set line spacing to 1/360 inch ESC + (n)
Tabulation
Horizontal tab execution HT
Set horizontal tabs. The values of n
1
to n
k
in this command are
the ASCII values of the print columns (at the current character
width) at which tabs are to be set. (1 < n < 255)
(1 < k < 32)
ESC D (n
1
) ... (n
k
) NUL
Move print position right by n/120 (*1) inch (for draft) or n/180 (*1)
inch (for letter) right from left margin
(n = n
1
+ n
2
x 256)
ESC $ (n
1
)(n
2
)
Move print position n/120 (*1) inch (for draft) or n/180 (*1) inch (for
letter) left or right from the current position
(n = n
1
+ n
2
x 256)
ESC \ (n
1
)(n
2
)
Vertical tab execution VT
Set vertical tabs. The values of n
1
to n
k
in this command are the
ASCII values of the print columns (at the current character
width) at which tabs are to be set. (1 < n < 255) (1 < k < 16)
ESC B (n
1
) ... (n
k
) NUL
*1, The value depends on the pitch set by the ESC ( U command.
*2, The value depends on the pitch set by the ESC ( U command. The default is 1/360 inch.