Low voltage directive (lvd) – Comtech EF Data OM20 User Manual
Page 13

OM20 Universal Outdoor Modem
Revision 5
Preface
MN-OM20
iii
Safety Compliance
EN 60950
Applicable testing is routinely performed as a condition of manufacturing on all units to ensure
compliance with safety requirements of EN60950.This equipment meets the Safety of Information
Technology Equipment specification as defined in EN60950.
Low Voltage Directive (LVD)
The following information is applicable for the European Low Voltage Directive (EN60950):
<HAR>
Type of power cord required for use in the European Community.
!
CAUTION: Double-pole/Neutral Fusing
ACHTUNG: Zweipolige bzw. Neutralleiter-Sicherung
International Symbols:
Symbol
Definition
Symbol
Definition
~
Alternating Current
Protective Earth /
Safety Ground
Fuse
Chassis Ground
NOTE
For additional symbols, refer to Cautions and Warnings, listed
earlier in this Preface.