Comtech EF Data SDM-9220 - Manual (Page 29)

Compliance Information
Memotec Inc. 2-9
If so, you will be given advance notice of the change to give you an opportunity
to maintain uninterrupted service.
• THE REGISTRATION NUMBER OF THE SYSTEM MUST BE PROVIDED
SO THAT THE TELEPHONE COMPANY CAN ASCERTAIN INTENDED
MODES OF OPERATION AND VERIFICATION OF REGISTRATION
PORTS.
• If a need arises in the future, the telephone company will call the user and request
the following information for any equipment being connected to the Public
Switched Telephone Network:
For equipment equipped with interface cards 100-1107-003/004 or
-503/504 (Quad/Dual FXO):
- Manufacturer:
Memotec Inc.
- Model Number:
Refer to the nameplate on the bottom of the unit
- FCC Registration #:
Refer to the nameplate (bottom of the unit)
- Ringer Equivalence Number (REN):
0.1B
- Facility Interface Code (FIC):
04DU9-1SN
- Service Order Code (SOC):
6.0F
- Telephone plug:
RJ11C
For equipment equipped with interface cards 100-1111-001/002 or –501/502
(Dual/Single T1):
- Manufacturer: Memotec Inc.
- Model Number:
Refer to the nameplate on the bottom of the unit
- FCC Registration #:
Refer to the nameplate (bottom of the unit)
- Ringer Equivalence Number (REN):
Not applicable
 Facility Interface Code (FIC):
 04DU9-BN
for 1.544 Mbps, D4
 04DU9-DN
for 1.544 Mbps, D4 and B8ZS
 04DU9-1KN
for 1.544 Mbps, ANSI ESF

04DU9-1SN
for 1.544 Mbps, ANSI ESF and B8ZS
- Service Order Code (SOC):
6.0F
- Telephone plug:
RJ48C