Comtech EF Data RCS10 User Manual
Page 270
RCS10 Technical Specifications
Appendix A
Page A-18
Opcode: <2C0BH>
Command modem terminal emulation
<1>
Emulation Mode
(0 = Add viewpoint, 1 = VT 100, 2 = WYSE50)
Opcode: <2C0CH>
Command modem terminal baud rate
<1>
Baud Rate
(0 = 300 baud, 1 = 600 baud, 2 = 1200 baud, 3 = 2400 baud, 4
= 800 baud, 5 = 9600 baud, 6 = 19200 baud, 7 = 38400 baud)
Opcode: <2C0DH>
Command modem configuration copy
<1>
Source Configuration
(0 = current, 1 = configuration 1, 2 = configuration 2,
3 = configuration 3, 4 = configuration 4, 5 = configuration 5)
<1>
Destination Configuration
(0 = current, 1 = configuration 1, 2 = configuration 2, 3
= configuration 3, 4 = configuration 4, 5 = configuration 5)
Note: Source and destination configuration configurations must be different. Error 0x441
will be returned if they are the same.