Comtech EF Data MD2401 User Manual
Page 41
MD2401 L-Band Multi Demod Installation and Operation Manual
User Interfaces
MN-MD2401
4–9
Revision 7
Figure 4-6. Interface Controls Menu
EXC Clock (MHz):
{N/A}
Reference Source:
{INTERNAL, EXTERNAL}
Allows the user to select the Frequency Reference Source.
Ext Ref Frequency (MHz):
{Selectable}
Allows the user to select the Frequency Reference Source.
Buffer Byte Size:
{nnnn Bits}
Allows the user to select the byte size Buffer
Buffer/msec:
{0 - 32 msecs}
Allows the user to set the Doppler Buffer Size in msec.
Buff Clk Select:
{RXSAT, SCTE, SCT}
Shows the current active buffer clock source.
Buff Clk Polarity:
{NORMAL, INVERTED}
Allows the user to select the Buffer Clock Polarity for the Rx
Terrestrial Clock relative to the Rx Data.
RX Ckt ID:
Allows the user to create an ID of the RX circuit.
Eb/No Thsd:
Allows the user to select the low end threshold alarm limits.