Comtech EF Data KP-10 - Manual (Page 29)

KP-10 External Keypad Revision 1
Operation MN/KP10.IOM
19
3.2 S INGLE RFT C OMMUNICATIONS
3.2.1 K EYPAD V ARIATIONS FOR AN RFT
When the KP-10 is being used with a single-system RFT, the valid function keys are:
FS MS AS
Scroll
OS RESET
Figure 6. Function Keys for use with an RFT
Table 9. Descriptions of Function Keys used with an RFT
Function Key Description
[RESET] Reset External Keypad
[OS] Switch Operation Status
[FS] Switch Fault Status
[MS] Switch Maintenance Status
[AS] Switch Address (see Note)
Note: The key labeled [KP ON] performs the
[AS] function.
CAUTION
Make sure the [SHIFT] indicator LED is OFF before using these keys.