Comtech EF Data KP-10 - Manual (Page 30)

KP-10 External Keypad Revision 1
Operation MN/KP10.IOM
20
3.2.2 S INGLE S YSTEM A DDRESS
If the KP-10 is connected to a single RFT, the KP-10 global address of “*” is sufficient
for communicating with the terminal. There is no need to ascertain the actual address of
the RFT, in this case. A list of typical commands used with an RFT includes the
following:
<add/ 'UCF_'
<add/ 'DCF_'
<add/ 'RF_'
<add/ 'UCA_'
<add/ 'DCA_'
<add/ 'AS_'
<add/ 'BR_'
<add/ 'PS_'
<add/ 'RFJ_'
<add/ 'CLNA_'
<add/ 'FAN_'
<add/ 'LFE_'
<add/ 'SEL_'
<add/ 'PGM_'
<add/ 'CPGM_'
<add/ 'XFE_'
<add/ 'OS_'
<add/ 'FS_'
<add/ 'SF_'
<add/ 'MS_'
<add/ 'ET_'
<add/ 'LM_'
<add/ 'LPE_'
<add/ 'RSW_'
Note: Replace "add" with the address of the device being accessed.