Comtech EF Data TRP500 - Manual (Page 36)

TRP500-4450 C-band Outdoor Amplifier Revision 1
Flash Upgrading MN-TRP500
3–4
10 Run the CReflash application by either double clicking the application icon from the
temporary folder (or Desktop), or by selecting the application from the Program Files menu:
a) Type in the correct IP address of the TRP500.
b) Select the firmware bulk image file as identified in Step 3. Type in the name, or select
the file using [Browse].
c) Click [Start] to begin the flash upgrade procedure.
11 Check that the transfer completed successfully:
►
12 Verify the file transfer.
a) Reboot the unit.
b) To verify that the new file has loaded, use the firmware version verification
procedure outlined in Step 1.
(a)
(b)
(c)