Dish Network 104333 - Manual (Page 21)

Finding the Device Codes
104333 21
F INDING THE D EVICE C ODES
You can find out what device code is set for each remote control mode.
Do the following:
1. Press and hold the mode button for the device,
for about three seconds. When all the other mode
button backlights come on, release the mode
button.
For example
2. Press the Pound ( # ) button twice. The mode
light flashes the number for each digit of the
current mode, with a pause between the groups
of flashes. A quick flash is for zero.
For example, the mode light flashes five times,
pauses, flashes seven times, pauses, and flashes
quickly for the 570 code.