Dish Network 104333 - Manual (Page 9)

TV (Television) Mode
104333 9
TV M ODE B UTTON
To use the remote to operate a television, you must first set up the
remote to control the television. See Controlling a Device on page 15.
Then, you must press the
TV mode button to set the remote to TV
mode. The TV mode button’s back light turns ON to show that the
remote is set to TV mode. Make sure to keep the remote in TV mode
to use the buttons as described in this section.
TV/V IDEO B UTTON
If the TV has video input options, use this button to switch the TV
among those options.
P OWER B UTTON
Press this button to turn the television ON or OFF.
M UTE B UTTON
Press this button to turn off the sound. Press it again to restore
the sound.
V OLUME B UTTON
Press the left-hand, minus (-) side of this button to lower the sound
volume. Press the right-hand, plus (+) side of this button to raise
the sound volume.
S ELECT B UTTON
The Select button works as the Enter button for a TV.