Datatek DT-7000 Utilities - Manual (Page 19)

U t i l i t i e s - D T 6 b a c k u p , D T 6 r e l o a d , D T 6 u p g r a d e – R e l e a s e 3 . 0
D T 7 b a c k u p , D T 7 r e l o a d
02/04/10 Datatek Applications Inc. 19
6 I
N S T A L L A T I O N
A
D D E N D U M
6.1 O BTAINING I NFORMATION FROM D ATATEK A PPLICATIONS I NC .
Load modules for all the Datatek migration products are obtained by sending email to either Bill Arndt at
arndt@datatekcorp,com or Dan Conklin at [email protected] . All other documentation,
including release notes, user manuals, “white-papers”, etc. can be accessed on the Datatek web site
and downloaded for your use.
6.2 I NSTALLING THE U TILITIES
To insure that the correct version of the binary load module has been retrieved and has not been
corrupted during the transmission process, the UNIX sum command can be used. (On some hosts, the
“-s” flag must be used with the sum command.) After transmitting the file to the host machine from the
PC to which the load module was initially sent from Datatek, on the host machine,
Key-in: sum < name of load module file>.
The value returned must match the number shown below:
Key-in: sum dt6utils.hpux.3.0 or sum dt6utils.solaris.3.0
Response: 7267 113 dt6utils.hpux.3.0 or 15104 88 dt6utils.solaris.3.0
.
After moving the utility image to the host platform and verifying the checksum, before executing the
utilities, the user must remove any filename extensions (mv <utility name>. <operating system >. <build
number> <utility name>) and make the file executable (chmod +x <utility name> or chmod 0555 <utility
name>.
For example:
mv dt6utils.hpux.3.0 dt6backup or mv dt6utils.solaris.3.0 dt6backup
chmod 555 dt6backup
The six utilities are embedded in a single image file. After creating the dt6backup image, link the
dt6reload, dt7backup, dt7reload, dt6upgrade, and dt7upgrade (not available yet) images to
dt6backup, as shown:
ln dt6backup dt6reload
ln dt6backup dt7backup
ln dt6backup dt7reload
ln dt6backup dt6upgrade
6.3 C AVEATS
‰ None
7 D
O C U M E N T A T I O N
This combination user manual / release notes is the only documentation for these applications. It is
available for download from the Datatek web site at URL:
http://www.datatekcorp.com/pdf/rn-DT6-7utils.pdf