Delta Dore 147 TYBOX Installation - Manual (Page 3)

>5s
1
0
EXIT
1
2
3
4
5
1
0
MENU 2
Measured temperature correction
(-5°C à +5°C par pas de 0,1°C).
Example: If the temperature displayed
on the device is 19°C and the
observed temperature is 20°C,
adjust the temperature by +1°C, then
confirm by pressing OK.
- 5°C < < +5°C
Before changing this setting,
the device must have been in
operation for at least 2 hours.
Temperature displayed in AUTO mode
0 : Continuous display of the
temperature setting.
In this case, press the i
button to display the room temperature
1 : Continuous display of the
room temperature.
In this case, press the
i button
to display the temperature setting.
Time display mode
12h-24h
24h
12h
Automatic time change
(summer/winter time)
Time before boiler maintenance
(0 to 365 days)
Reprogramme after
each maintenance operation
--- (0) to 365 days
0,2°C < < 2°C Hysteresis
0,4°C
Control time base
If you choose an "on/off" type setting,
you can adjust the hysteresis
(or differential) via menu 2-11
Minutes
Minutes
Minutes
Minutes
On/Off
Resetting the boiler operating time
meter
No
Yes
Permission to change
Programme and settings
0 : Modifications permitted to
programme and settings
1 : Modifications to programme
not permitted and adjustment of
settings limited.
Tybox 137: Comfort setting
limited between 16 and 22°C.
Tybox 237-337: +/- 3°C either
side of the last setting.
: 5°C < < 30°C
: 5°C < < 16°C
+/- 3°C
PROG
Press button 2.
To change the different settings, press the + or - but-
tons, then press the OK button to confirm and move
on to the next setting.
Turn the selector dial to ,
then press the i button for 5
seconds.
To exit the mode,
turn the selector dial
to another mode.