Plc radio gp8 option, Checking your program, Programming the other zones – Delta Dore 620 RADIO DRIVER User Manual

Page 10: Exiting the programming mode, Programming

Advertising
background image

- 19 -

PLC RADIO GP8 option

The PLC RADIO GP

8

option is an energy manager for

new or existing housing.

Associated with the RADIO DRIVER, it lets you:

- control the heating through receivers by using line

carrier transmission (no modification of the electric
installation),

- provide load-shedding for up to

8

channels (single or

three-phase),

- display the total consumption (if associated with

an electronic meter). Possibility of also measuring
consumption per appliance (heating, DHW, other)
by adding additional CTs (ref. 6330004),

- associate home automation products (door/window

magnetic contact, alarm control unit, telephone
transmitter, etc.),

- display the outside temperature (with wireless outdoor

probe ref. 6300036).

- 18 -

Checking your program

Press the

button repeatedly to check the accuracy of

the Comfort and Economy periods you created.

Press the OK button to check the next day.

Programming the other zones

The programming for the other zones is available after
pressing (

OK

) of the day 7 of the current zone.

Exiting the programming mode

Turn the knob to another mode.

Progr

a

m

Profile

Verific

a

tion

of the different
or period

s

Time

s

lot

con

su

lted

COMMENTS: Depending on the configuration made
during installation, programming can be weekly or daily.
Likewise, this programming may be done in increments
of one hour, 30 minutes, or 15 minutes. To change these
settings, refer to the “installation guide”, or contact our
customer service department or your installer.

Programming

Advertising