I/o connectors, Hardware installation, S/pdif connector – DFI COM330-B User Manual
Page 34
Advertising
![background image](/files/781233/content/doc034.png)
34
2
Hardware Installation
1
ON
4
5
1
ON
4
5
S/PDIF Connector
The S/PDIF connector is used to connect external S/PDIF ports. Your S/PDIF
ports may be mounted on a card-edge bracket. Install the card-edge bracket to
an available slot at the rear of the system chassis then connect the audio cable
to the S/PDIF connector. Make sure pin 1 of the audio cable is aligned with pin 1
of the connector.
5
1
+5V
Key
SPDIF out
Ground
SPDIF in
I/O Connectors
Advertising
This manual is related to the following products: