DFI NP951-B16C - Manual (Page 17)

17
2
Hardware Installation
System Memory
Important:
Electrostatic discharge (ESD) can damage your system board, processor,
disk drives, add-in boards, and other components. Perform the upgrade
instruction procedures described at an ESD workstation only. If such a
station is not available, you can provide some ESD protection by wearing
an antistatic wrist strap and attaching it to a metal part of the system
chassis. If a wrist strap is unavailable, establish and maintain contact
with the system chassis throughout any procedures requiring ESD pro-
tection.
SODIMM
The system board is equipped with a 200-pin SODIMM socket that supports DDR2
module.
BIOS Setting
Configure the system memory in the Advanced Chipset Features submenu of the
BIOS.