DFI CD101-N - Manual (Page 30)

www.dfi .com
30
Chapter 3 BIOS Setup
Chapter 3
PCI Subsystem Setting
This section is used to configure the PCI Subsystem Management.
In case of multiple Option
ROMs (Legacy and EFI
Compatible), specifi es
what PCI Option ROM
to launch.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
PCI Bus Driver Version V 2.05.01
PCI Option ROM Handling
PCI ROM Priority [EFI Compatible ROM]
Advanced
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit
ACPI Power Management Configuration
This section is used to configure the ACPI Power Management.
Enables or disables the
BIOS ACPI Auto Con-
fi guration.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
ACPI Power Management Confi guration
Enable ACPI Auto Conf
ACPI Sleep State
Lock Legacy Resource
USB Dev Wake From S3
Advanced
[Disabled]
[S3 (Suspend to RAM)]
[Disabled]
[Enabled]
ACPI Sleep State
Selects the highest ACPI sleep state the system will enter when the Suspend
button is pressed.
S1(POS) Enables the Power On Suspend function.
S3(STR) Enables the Suspend to RAM function.
Lock Legacy Resource
Enables or disables lock of legacy resource.
USB Dev Wake From S3
Enables or disables USB device wake from S3.
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit