DFI CD101-N - Manual (Page 6)

6
I/O Connectors • 1 connector for 2 external USB 2.0/1.1 ports
• 2 connectors for 2 external RS232 serial ports (2.0mm pitch)
• 1 LVDS LCD panel connector
• 1 LCD/inverter power connector
• 1 12-bit Digital I/O connector
• 1 Digital I/O power connector
• 1 front audio connector for line-out and mic-in jacks
• 2 SATA 2.0 ports
• 2 SATA power connectors
• 1 touch panel connector* (optional)
• 1 chassis intrusion connector
• 1 front panel connector
• 2 fan connectors
BIOS • AMI BIOS
- 16Mbit SPI BIOS
Energy Effi cient
Design • ACPI v3.0 specifi cation
• System Power Management
• Wake-On-Events include:
- Wake-On-USB KB/Mouse
- Wake-On-LAN
- RTC timer to power-on the system
• AC power failure recovery
Damage Free
Intelligence • Monitors CPU/system temperature and overheat alarm
• Monitors VCORE/VGFX/1.05V/3.3V/5VSB/3VSB/VBAT voltages and failure
alarm
• Monitors CPU/system fan speed and failure alarm
• Read back capability that displays temperature, voltage and fan speed
• Watchdog timer function
- Watchdog timeout programmable via software from 1 to 255 seconds
Power
Consumption • 21.6W with D2550 at 1.86GHz and 2x 2GB DDR3 SODIMM
• 19.104W with N2800 at 1.86GHz and 2x 2GB DDR3 SODIMM
• 16.92W with N2600 at 1.60GHz and 1x 2GB DDR3 SODIMM
OS Support • Windows XP Professional x86 & SP3 (32-bit)
• Windows 7 Ultimate x86 & SP1 (32-bit)
Temperature • Operating: 0 o C to 60 o C
• Storage: -20 o C to 85 o C
Humidity • 10% to 90%
Dimensions • Mini-ITX form factor
- 170mm (6.7") x 170mm (6.7")
• Heat sink with fan
- CD101-N2550: 68mm x 50mm x 40mm
• Heat sink
- CD101-N2600/N2800: 68mm x 50mm x 30mm
Certifi cation • CE
• FCC Class B
• RoHS
Chapter 1 - Introduction
Specifications
Processor • CD101-N2550:
- Intel ® Atom TM D2550, 1.86GHz, 2x 512K L2, 10W TDP, dual-core
- Cooling: heatsink with cooling fan
• CD101-N2800:
- Intel ® Atom TM N2800, 1.86GHz, 2x 512K L2, 6.5W TDP, dual-core
- Cooling: heatsink (fanless solution)
• CD101-N2600:
- Intel ® Atom TM N2600, 1.6GHz, 2x 512K L2, 3.5W TDP, dual-core
- Cooling: heatsink (fanless solution)
Chipset • Intel ® NM10 Express chipset
System Memory • Supports DDR3 1066MHz (CD101-N2550/CD101-N2800)
Supports DDR3 800MHz (CD101-N2600)
• Supports single channel memory interface
• Two 204-pin DDR3 SODIMM sockets support up to 4GB system memory
(CD101-N2550/CD101-N2800)
One 204-pin DDR3 SODIMM socket supports up to 2GB system memory
(CD101-N2600)
• DRAM device technologies: 1Gb, 2Gb and 4Gb DDR3 DRAM technologies are
supported for x8 and x16 devices, unbuffered, non-ECC
Expansion Slots • 1 PCIe x1 slot
• 1 Mini PCIe slot
- Supports USB and PCIe signals
- Supports half size and/or full size Mini PCIe card
• 1 CompactFlash socket* (optional)
Graphics • Intel ® GMA 3650 (CD101-N2550/CD101-N2800)
Intel ® GMA 3600 (CD101-N2600)
• Supports DVI (DVI-D signal), VGA, and LVDS interfaces
• LVDS: 24-bit, dual channel, resolution up to 1920x1200 @60Hz
• DVI and VGA: resolution up to 1920x1200 @ 60Hz
• Supports Hardware H.264/AVC, MPEG-2 video decoder, VC-1, DirectX 9, 1080p
decoder
Audio • Realtek ALC886 5.1-channel High Defi nition Audio
LAN • 2 Intel ® 82574L Gigabit Ethernet Controllers; or 2 Intel ® I210 PCI Express
Gigabit Ethernet controllers* (optional)
• Integrated 10/100/1000 transceiver
• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Serial ATA • Supports 2 Serial ATA interfaces
• SATA 2.0 with data transfer rate up to 3Gb/s
• Integrated Advanced Host Controller Interface (AHCI) controller
Rear Panel I/O
Ports • 1 4-pin 9~24V DC-in jack (default) or 4-pin power connector* (optional)
• 1 DVI-I port (DVI-D signal)
• 1 VGA port
• 2 DB-9 serial ports
- 1 RS232/422/485 (RS232 and/or Power)
- 1 RS232
• 2 LAN ports
• 4 USB 2.0/1.1 ports
• Mic-in, Line-in, Line-out jacks
Chapter 1
Chapter 1 Introduction www.dfi .com
Note:
*Optional and is not supported in standard model. Please contact your sales represen-
tative for more information.