DFI DL631-C226 - Manual (Page 45)

www.dfi .com
45
Chapter 3 BIOS Setup
Chapter 3
Select the Video Device
which will be activated
during POST. This has no
effect if external graphics
present.
Secondary boot display
selection will appear based
on your selection.
VGA modes will be sup-
ported only on primary
display.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
LCD Control
Primary IGFX Boot Display [VBIOS Default]
Chipset
LCD Control
This field configures the LCD control.
When any device is selected in the Primary IGFX Boot Display, it will display the
following information:
Select the Video Device
which will be activated
during POST. This has no
effect if external graphics
present.
Secondary boot display
selection will appear based
on your selection.
VGA modes will be sup-
ported only on primary
display.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
LCD Control
Primary IGFX Boot Display
Secondary IGFX Boot Display
[CRT]
[None]
Chipset
Secondary IGFX Boot Display
Selects the secondary display device.
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
NB PCIe Configuration
This field is used to configure the settings of NB PCI Express.
Confi gure PEG0
B0:D1:F0 Gen1-Gen3.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
NB PCIe Confi guration
PEG0 - Gen X
PEG1 - Gen X
Enable PEG
[Auto]
[Auto]
[Auto]
Chipset
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
PEG0 - Gen X
Configures PEG0 B0:D1:F0 Gen1-Gen3.
PEG1 - Gen X
Configures PEG1 B0:D1:F1 Gen1-Gen3.
Enable PEG
Enables or disables PEG.