DFI HD636-H81CS - Manual (Page 39)

39
Chapter 3 BIOS Setup
Chapter 3
www.dfi .com
PC Health Status
This section displays the hardware health monitor.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
PC Health Status
 Smart Fan Function
Case Open
CPU Temperature
System Temperature
CPU Fan Speed
System Fan 1 Speed
System Fan 2 Speed
VCore
+5V
+12V
+1.5V
+3.3V
3VSB
VBAT
Advanced
[Disabled]
: +55.0 C
: +39.5 C
: 5113 RPM
: N/A
: N/A
: +1.776 V
: +5.077 V
: +11.968 V
: +1.520 V
: +3.440 V
: +3.328 V
: +3.040 V
Smart Fan Function
Smart Fan Function
Setting
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Advanced
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit


Smart Fan Function
CPU Smart Fan Control
Boundary 4
Boundary 3
Boundary 2
Boundary 1
Speed Count 5
Speed Count 4
Speed Count 3
Speed Count 2
Speed Count 1
System Smart Fan (1) Control
Boundary 4
Boundary 3
Boundary 2
Boundary 1
Speed Count 5
Speed Count 4
Speed Count 3
Speed Count 2
Speed Count 1
System Smart Fan (2) Control
Boundary 4
Boundary 3
Boundary 2
Boundary 1
Speed Count 5
Speed Count 4
Speed Count 3
Speed Count 2
Speed Count 1
[Enabled]
60
50
40
30
100
75
50
40
30
[Enabled]
60
50
40
30
100
75
50
40
30
[Enabled]
60
50
40
30
100
75
50
40
30
Enable CPU Smart Fan
Parallel Port
Enables or disables the parallel port (LPT/LPTE).
Change Settings
Selects an optimal setting for the super IO device.
Device Mode
Selects the device mode for the printer port.
Enable or Disable Parellel
Port (LPT/LPTE)
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Parallel Port Confi guration
Parallel Port
Change Settings
Device Mode
Advanced
[Enabled]
[Auto]
[STD Printer Mode]
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Parallel Port Configuration
Sets the parameters of the parallel port (LPT/LPTE).