DR Power Walk-behind 12.5 Premier - Manual (Page 10)

10 PREMIER DR ® FIELD AND BRUSH MOWER
Check the Tire Pressure
Tools Needed:
 Tire Pressure Gauge

Air Compressor
1. Remove the Valve Stem Protective Cap (Figure 3) and check the tire
pressure with a tire pressure gauge.
2. If the pressure is too low, add air through the Valve Stem with an air hose.
3. Replace the Valve Stem Protective Cap when finished.
Do not over inflate the tires. Inflate to the manufacturer’s recommended
pressure found on the tires.
Figure 3
Valve Stem
Protective Cap