DR Power Tow-Behind Vacuum Hose (Pre-August 2010) - Manual (Page 13)

CALL TOLL FREE 1-800-DR-OWNER 10
Installing the Optional Universal Lawn Deck Adapter (Kit No. 21168)
The design of the DR Universal Lawn Deck Adapter is adaptable to a variety of Mower Decks as found on the
various makes of tractors and mowing machines.
The intent of the information provided here is to show a typical method for obtaining measurements and
determining shapes and contours for proper fitting of the unit to your machine. Your particular machine may
require slightly different or additional operations to obtain the best fit.
•
TURN OFF THE IGNITION AND/OR REMOVE THE SPARK PLUG WIRE(S) ON YOUR MOWER BEFORE
STARTING THIS PROCEDURE.
•
BE SURE TO STABILIZE YOUR MACHINE ON FLAT TERRAIN AND APPLY THE PARKING BRAKE BEFORE
STARTING THIS PROCEDURE.
•
ALWAYS WEAR EYE PROTECTION WHEN CUTTING OR DRILLING WITH POWER TOOLS.
Kit Parts List:
•
Universal Deck Adapter
•
7" to 6" Hose Adapter
•
Template Wire
•
Hinge Hardware:
(2) Hinge Brackets
(1) Hinge Pin w/two (2) Push Nuts
(1) Bracket Plate
Mounting Bolts and Nuts
•
Instruction Sheet
Tools Needed:
•
Jig Saw
•
Pencil or Fine Tipped White Marker
•
1/2" Wrench or Socket
•
Electric Drill w/1/4" and 3/8" Drill Bits
•
Pliers
•
Scissors or Utility Knife
•
C-Clamps or Spring Clamps
•
Masking tape
•
Straight Edge
•
Tape Measure
•
Square, Adjustable
•
File, Sand Paper or De-Burring Tool