Assembling the dr leaf and lawn vacuum – DR Power Walk-Behind 11.50 fpt (August 2010 - Present) User Manual

Page 9

Advertising
background image

CONTACT US AT www.DRpower.com 9

Hardware Bag Contents (

Figure 4 and Table Below)

ITEM# PART

# DESCRIPTION

QTY

1

143401

Nut, Nylon Lock, 1/4-20

1

2

284701

Bolt, Hhcs, 1/4-20 x 2-1/4"

1

3

149651

Washer, Fender, 5/16"

6

4

167791

Bolt, Hhcs, 5/16-18 x 3/4"

4

5

146051

Bolt, Hhcs, 5/16-18 x 1"

10

6

144181

Locknut, Whiz, 5/16-18

5

7

143131

Nut, Nylon Lock, 5/16-18

10

8

149451

Hook, Bag Hanger

3

9

154821

Eyebolt, 5/16-18 x 5"

1

10

285641

Knob, Hand, 5/16-18

4

11

145861

Cotter Pin, Hair Spring

1

12

155121

Screw, Self Tapping, 10-32 x 3/8"

1

13

155111

Lock Washer, Split, 5/16"

4

14

145151

Flat Washer, 5/16"

2

15

154801

Flat Washer, 1/4"

1

16

285631

Carabiner

2

17

285651

Label, shift Rod

1

Compare the contents of the Shipping Box, Poly Bag and Hardware Bag with
the “Contents” lists above. If you have any questions please contact us at
www.DRpower.com or call 1-800-DR-OWNER (376-9637) for assistance.

NOTE: Assembly should be done on a clean, level surface.

2. Use the utility knife to cut down the two corners one end of the Box, and

then roll the machine out (Figure 5).

Assembling the DR LEAF and LAWN VACUUM

Tools Needed:

5/16" Wrench

Two 1/2" Wrenches

Two 7/16" Wrenches

1. Position the two Lower Bag Hanger Frames onto the cross member of the

Lower Handle and loosely install with two 5/16-18 x 1" Bolts and two 5/16-
18 Nylon Locknuts using two 1/2" Wrenches (Figure 6).

2. Position the Upper Bag Hanger Frame onto the two Lower Bag Hanger

Frames with the top holes facing closer to the rear of the machine. Secure
the lower two sets of holes in the Upper Bag Hanger Frame to the Lower
Bag Hanger Frames with four 5/16-18 x 1" Bolts and four 5/16-18 Nylon
Locknuts using two 1/2" Wrenches. Tighten the Hardware you installed in
the previous step.

Figure 6

Upper Bag
Hanger Frame

Bolts and
Locknuts

Lower
Bag
Hanger
Frame

Bolts and
Locknuts

Not this
Hole

LLV
Machine

Figure 5

DO NOT try to lift the machine out of the box, it is very heavy and may cause
severe injury.

1

Figure 4

2

3

4

5

6

7

9

8

11

10

12

13

14

15

17

16

Advertising