DR Power 18 HP (June 2004 - Present) - Manual (Page 11)

STEP II – ATTACHING THE HITCH ARMS AND HITCH ASSEMBLY
• Attach the hitch arms (item #10) to the trailer frame using the two hitch arm mounting plates (item #9) and four
1/2”-13 x 1-1/4” HHCS (item #60) from the bolt bag. Do not tighten hardware at this time.
• Attach the trailer hitch assembly to the hitch arms as shown with two 1/2”-13 x 3” HHCS (item #61) and two
1/2”-13 gripco nuts (item #63) from the bolt bag. Tighten all hardware.
• Slide the stand (item #8) up through the holes in the hitch assembly and secure with the hair cotter pin (item
#37).
11