Delta Tau MACRO CPU BOARD 4Ax-602804-xHxx - Manual (Page 30)

MACRO-CPU Hardware Reference
P1: UBUS Interface Connector
(96 pin EURO-Connector at F-1, 2, 3, 4)
Front View on MACRO-CPU Card
Pin # Row A Row B Row C
1 +5Vdc +5Vdc +5Vdc
2 GND GND GND
3 BD01 DAT0 BD00
4 BD03 SEL0 BD02
5 BD05 DAT1 BD04
6 BD07 SEL1 BD06
7 BD09 DAT2 BD08
8 BD11 SEL2 BD10
9 BD13 DAT3 BD12
10 BD15 SEL3 BD14
11 BD17 DAT4 BD16
12 BD19 SEL4 BD18
13 BD21 DAT5 BD20
14 BD23 SEL5 BD22
15 BS1 (GND) DAT6 BS0 (GND)
16 BA01 SEL6 BA00
17 BA03 DAT7 BA02
18 BX/Y SEL7 BA04 (n.c.)
19 CS3- BA06 (n.c.) CS2-
20 BA05 (CS7-) BA07 (n.c.) CS4- (CS6-)
21 CS12- BA08 (n.c.) CS10-
22 CS16- BA09 (n.c.) CS14-
23 BA13 (n.c.) BA10 (n.c.) BA12 (n.c.)
24 BRD- BA11 (n.c.) BWR-
25 BS3 (GND) MEMCS0- (n.c.) BS2 (GND)
26 n.c. MEMCS1- (n.c.) RESET
27 PHASE+ n.c. SERVO+
28 PHASE- (n.c.) n.c. SERVO- (n.c.)
29 GND n.c. GND
30 -15Vdc PWRGUD (n.c.) +15Vdc
31 GND GND GND
32 +5Vdc +5Vdc +5Vdc
1. Refer to the UBUS Specification for detailed signal descriptions. This interface is NOT VME bus compatible.
2. Items shown in parentheses represent pin descriptions for -104 and earlier revision MACRO-CPU boards.
3U MACRO-CPU Board Connector Pin-outs 26