ESI GigaStation - Manual (Page 27)

26
The Sample Rate option gives you three sample rates which are available for the
GIGAStation. The GIGAStation supports 32KHz, 44.1KHz, and 48KHz. The sample rate
must be selected here, then the same sample rate has to be set in your application.
4. Config –Latency
This will decide the latency of the GIGAStation. The GIGAStation provides 4 different
sample buffer sizes: 64 samples, 128 samples, 256 samples, and 512 Samples. In general,
a 64 sample buffer size results in 3 milliseconds of latency.
5. Config –Factory Default
This returns all GIGAStation configurations to their default setting.
6. Always on Top
This will set the GIGAStation Control Panel to always display over the active windows.
If this is not selected, the active windows will be set over the GIGAStation.