ESI MAYA44 XTe - Manual (Page 11)

ESI MAYA44 XTe
11
The tip of the stereo TRS connector is connected with the tip of the left TS connector. The ring of
the stereo TRS connector is connected with the tip of the right TS connector. The sleeve is
connected with sleeve / ground of both channel connectors.
The same type of cables are typically used as so-called ‘insert-cables’ to connect effects units to
many mixing consoles. This information might help you when you want to make or purchase such a
cable.
5.2 Connection Examples
Line Inputs
MAYA44 XTe has two stereo line inputs (INPUT
1/2 and INPUT 3/4) that can be connected to any
device with regular unbalanced -10dBv line
output such as the output of a mixing console, a
CD or MD player, a sound module, a keyboard
with sound engine, a synthesizer or others.
Instrument and Microphone Inputs
MAYA44 XTe has a built in professional microphone
preamp with +48V phantom power support. You can
connect a dynamic microphone as well as a condenser
microphone to the top input. INPUT 1/2 has to be
switched to accept microphone signals in the Control
Panel (see chapter 6 of this manual). If you use a
condenser microphone, you need to enable +48V in
the Control Panel as well. Please make sure to use a
fully balanced XLR to TRS microphone cable.
In addition, MAYA44 XTe has a Hi-Z instrument
input that can be used for a direct connection to an