ESI MAYA44 XTe - Manual (Page 12)

ESI MAYA44 XTe
12
electric guitar. INPUT 3/4 has to be switched to accept guitar signals in Control Panel (see chapter 6
of this manual). Note that the input signal will be mono only.
Line and Headphone Outputs
The MAYA44 XTe stereo line outputs (OUTPUT 1/2 and
OUTPUT 3/4) can be connected to external devices with
line input such as multi track recorders, a HiFi stereo
system, active monitoring speakers, a power amplifier or
analog mixing consoles. As the two stereo output pairs
are totally independent, they can be connected to different
channel of a mixer or to different devices altogether and
different audio signals can be sent out to them
simultaneously. This is especially nice in situations where
you need two independent stereo signals, for example in a
DJ setup for the main and pre-listen signal.
In addition, both stereo line outputs can be enabled used
as headphone outputs.
S/PDIF I/O
MAYA44 XTe provides optical S/PDIF digital in &
outputs. You can use this to send signals to the digital
input of an MD Player, CD Recorder, DAT-Recorder or
Digital Mixer. With the digital input, you can record
signals from devices with an optical S/PDIF output. The
Control Panel (see chapter 6 in this manual) allows you to
control S/PDIF input and output parameters.