ESI MAYA44 XTe - Manual (Page 19)

ESI MAYA44 XTe
19
* 1/4" TRS (stereo) jack
2) peak level: +6dBV @ 0dBFS
3) attenuation: -48dB ~ +0dB (1dB step size)
4) impedance: 33 Ohm (line out 1 and 2, headphone out), 33 Ohm
(line out 3 and 4, headphone out)
4. Microphone Preamp
1) mic preamp gain: +21dB
2) peak level: 0dBFS @ 246mV
3) +48V phantom power supply
4) impedance: 3.3K Ohm
5. Hi-Z / Guitar Input
1) impedance: min. 330K Ohm
6. Headphone Amplifier
1) load impedance range: 32-300 Ohm (for best performance)
2) output power: 125mW @ 32 Ohm per channel
<Digital Audio>
1. Sample Rates
1) 32, 44.1, 48, 96 kHz input and output
2. A/D Converter
1) SNR: 102dBA (0dB @ fs=48kHz)
2) dynamic range: 102dBA
3) THD: -95dB (1kHz, -1dBFS)
4) interchannel isolation: 90dB
3. D/A Converter
1) SNR: 108dBA (0dB @ fs=48kHz)
2) dynamic range: 108dBA
3) THD: -97dB(1kHz, 0dBFS)
4) interchannel isolation: 100dB
4. Digital Input
1) connector type: optical TOSlink
2) format: IEC-60958 Consumer (S/PDIF)
3) resolution: 24-Bit
5. Digital Output
1) connector type: optical TOSlink
2) format: IEC-60958 Consumer (S/PDIF)
3) resolution: 24-Bit
4) digital pass thru
9. General Information
Trademarks
ESI, and MAYA44 XTe are trademarks of ESI Audiotechnik GmbH. Windows is a trademark of
Microsoft Corporation. Other product and brand names are trademarks or registered trademarks of
their respective companies.
The FCC and CE Regulation Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions : (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Caution : Any
changes or modifications in construction of this device with are not expressly approved by the party
responsible for compliance, could void the user's authority to operate equipment.