ESI Waveterminal 2496 - Manual (Page 25)

26
D I G I T A L O U T P U T M I X M O N I T O R I N G
This is where you select the source that is routed to the Digital Output jacks of the WT2496.
1. Analog In
A signal connected to the Analog Input ports of the WT2496 is routed to the Digital Output
ports for input monitoring.
2. Digital In
The signal connected to the Digital Input port of the WT2496 is routed to the Digital Output
port for input monitoring.
3. Wave 1
The output of a wave device routed to the Waveterminal 2496 is routed to the Digital Output
port for monitoring.
4. Wave 2
The output of a wave device routed to the Waveterminal 2496(D) is routed to the Digital
Output port for monitoring.
Just remember that when you add
two audio signals together, there
is about 3dB overall increase in
signal level. When you select all
four, there can be as much as 12
dB increase in the overall output
level. Refer to the Output Mix
Mode section for more details on
how to handle mixed signal
levels.