ESI Waveterminal 2496 - Manual (Page 31)

32
* Caution 1
You can use the multi client function in GigaStudio.
Using the EWDM drivers with GigaStudio v2.2 can support the use of GigaStudio with
another audio application without choosing a different output port.
You can use the same output port for two different audio applications.
For example, the outputs of Cakewalk and GigaStudio can both go to the Waveterminal
2496 Outputs.
* Caution 2
In the above case you have to be cautious with the output levels of each audio application.
Two different outputs routed to the same output may cause noise due to clipping.
You should lower the output level in comparison to using only one audio application at a
time.
* Caution 3
GigaStudio functions more properly when working at a low latency.
Go to the Config Menu in the WT2496 Control Panel.
Set the latency to 64 or 128 samples.
Higher latency has the possibility of generating noise.
.