ESI ESU1808 - Manual (Page 9)

ESU1808 ESI
3. Hardware Installation
3.1 Minimum system requirements
PC
- Pentium 4 or Athlon 1.4GHz or faster (or 100% compatible)
- at least 512MB RAM
- at least 1 GB available space on HDD
- one available USB 2.0 port
- DVD-ROM drive (for Cubase LE 4 installation)
- internet connection (for Cubase LE 4 activation)
- Windows XP (with Service Pack 2) 32-bit or Windows Vista 32-bit
Mac
- Power Macintosh G5, Core Solo 1.5GHz or faster
- at least 512MB RAM
- at least 1 GB available space on HDD
- one available USB 2.0 port
- DVD-ROM drive (for Cubase LE 4 installation)
- internet connection (for Cubase LE 4 activation)
- Mac OS X 10.4.4 or higher
3.2 Installation
After unpacking ESU1808, connect the power supply to the special connector on the rear panel.
Connect the supplied power cable of ESU1808 to your power outlet.
Now, find the USB port on your computer. A pair of standard USB ports are pictured below.
Plug in the supplied USB cable to the square USB connector on the rear panel of ESU1808. The
other end of the cable should be connected to a USB 2.0 port of your computer.
If you are unsure if your computer has a USB 2.0 port (or only USB 1.1), please check the
documentation of it for more information. ESU1808 requires a USB 2.0 port and will not work with
USB 1.1.
9