ESI U24 XL User Manual
Page 6
ESI
U24 XL
6
3.1 Windows XP
Disconnect U24 XL before you install the driver if it has been connected already. Then launch
setup.exe from the Windows folder of the included driver CD or from a download of a recent driver
from our website.
You will now see a dialog as shown on the left picture below. Click Next. You can define the target
directory for the installation now. Confirm it with Next.
The installer now informs you that the driver installation will start as shown on the left picture
below. Confirm this with Next. During the following process you will see a dialog box once or
several times that informs you that the driver software has not passed Windows Logo testing. Please
be assured that our drivers have been tested in various different ways and are OK to be used.
Confirm any such dialog with Continue Anyway.
You will now be prompted to connect the hardware on the next dialog that is shown below on the
left. Plug in U24 XL. Do not click Next yet. During the driver installation, Windows might again
prompt you to confirm the Windows Logo testing dialog once or several times with Continue
Anway before the driver installation is finalized.