ESI U24 XL - Manual (Page 8)

ESI U24 XL
8
You will now be prompted to connect the hardware on the next dialog that is shown below on the
left. Plug in U24 XL. Do not click Next yet. Instead, wait a few seconds for the automatic device
driver installation. You can monitor this in the task notification area where Windows Vista/7
informs that the driver is installed via a bubble message box.
You can now finally click OK on the Information dialog. The installation is now finished. To
confirm this, please check if the ESI icon is displayed in the taskbar notification area as shown
below.
If yes, the driver installation has been completed successfully.
3.3 Mac OS X
Mac OS X already provides support for class compliant USB audio devices such as U24 XL. This
means that no software or driver needs to be installed to use U24 XL under Mac OS X. Simply
connect the unit with the supplied USB cable to your Mac and you can start using it.
Controlling the basic options of U24 XL under Mac OS X is mainly done via the Audio-MIDI-Setup
utility from Mac OS X described in section 5.3 of this manual.
4. U24 XL Control Panel
This chapter describes the U24 XL Control Panel under Windows. Under Mac OS X no special
Control Panel is required for U24 XL. If you are using U24 XL under Mac OS X, please check
section 5.3 with more details.