ESI U24 XL User Manual
Page 7
ESI
U24 XL
7
You can now finally click OK on the Information dialog. The installation is now finished. To
confirm this, please check if the ESI icon is displayed in the taskbar notification area as shown
below.
If yes, the driver installation has been completed successfully.
3.2 Windows Vista / 7 / 8
Disconnect U24 XL before you install the driver if it has been connected already. Then launch
setup.exe from the Windows folder of the included driver CD or from a download of a recent driver
from our website.
When launching the installation, Windows Vista/7/8 might prompt a security message. Make sure
to allow the installation. You will then see a dialog as shown on the left picture below. Click Next.
You can define the target directory for the installation now. Confirm it with Next.
The installer now informs you that the driver installation will start as shown on the left picture
below. Confirm this with Next. During the following process you will see a Windows Security
dialog box once or several times that asks you for confirmation to install the driver software.
Confirm any such dialog with Install.