General information – ESI KeyControl 25 XL User Manual
Page 13
KeyControl 25 XL
ESI
13
7
ON / OFF
Certain function On/Off, or pedal polarity positive/negative.
8
don
A certain function has been done.
9
Err
Operation Error.
10
SEu
Parameters have been uploaded.
11
SEd
Parameters have been downloaded.
6. General Information
Trademarks
ESI, KeyControl and KeyControl 25 XL are trademarks of EGOSYS, Inc. and ESI Audiotechnik
GmbH. Windows is a trademark of Microsoft Corporation. Other product and brand names are
trademarks or registered trademarks of their respective companies.
The FCC Regulation Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Caution : Any
changes or modifications in construction of this device with are not expressly approved by the party
responsible for compliance, could void the user's authority to operate equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense. If
necessary, consult an experienced radio/television technician for additional suggestions.
Correspondence
For technical support inquiries, contact ESI support online at www.esi-audio.com.
Disclaimer
All features and specifications subject to change without notice.
Parts of this manual are continually being updated. Please check our web site www.esi-audio.com
occasionally for the most recent update information.
Declaration of Conformity (for the European Union)
The product described in this manual is manufactured in China by ESI Audiotechnik GmbH,
Brennerstraße 48, D-71229 Leonberg, Germany. The product is labelled with the CE mark and
conform to the protection requirements of the European Electromagnetic Compatibility Standards