ESI KeyControl 25 XL - Manual (Page 5)

KeyControl 25 XL ESI
5
2. Description of KeyControl 25 XL
2.1 Front Panel
(1) EDIT button, used to assign / change parameters. When the edit functionality is enabled, the
LED next to it will be switched on.
(2) data buttons (up / down), by default used to move the octave of the keyboard up / down
(preset #154 - Octave). The octave position is indicated by the LEDs next to the buttons.
(3) SWITCH button, used to switch the controller knobs between R1~R4 and R5~R8
parameters. The LEDS indicate the selected group.
(4) data slider, an assignable controller that by default controls the master volume (preset #147
– master volume ).
(5) PITCH BEND wheel, an assignable controller that by default controls the pitch bend (preset
#146 – pitch bend ).
(6) MODULATION wheel, an assignable controller that by default controls the modulation value
(preset #148 – modulation).
(7) R1~R8 knobs, each are assignable rotary controllers that can control various functions. By
default, R1 to R4 are assigned to preset #7 – channel volume, R5 is assigned to preset
#152 – program change
, R6 is assigned to preset #153 – channel, R7 is assigned
to preset #156 – tempo, R8 is assigned to preset #157 – velocity curve. The
SWITCH button allows you to switch between R1~R4 and R5~R8 groups.
(8) additional control functions, when the edit function is enabled via the EDIT button, the
functions printed above the keyboard are assigned to each key.
(9) LED display, shows the current parameters and status.