ETA Silentino - Manual (Page 24)

– When taking the plug from the electric socket, never pull the power cord or the vacuum
cleaner. When winding the cord, hold the plug to prevent lashing of the cord around and to
prevent possible injury. If you need to use an extension cord, it has to be uncorrupted and
it has to comply with the valid standards.
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
– In order to ensure safety and proper function of the appliance, use only original spare
parts and accessories approved by the manufacturer.
– Never use the appliance for any other purpose than for the intended one described in
these instructions for use! This appliance is not intended for outdoor use.
– The manufacturer is not responsible for damage caused by improper use of the appliance
and the accessories and its warranty for the appliance does not apply in situations when
the safety warnings above are not complied with. Failure to replace or maintain all filters
regularly according to the instructions in Chapter IV., V. and also using non-original
filters, the properties of which resulted in failure or damage of the vacuum cleaner, is also
understood to be improper use of the appliance.
For trouble-free operation of the vacuum cleaner, please use the
tested dust filters and micro-filters recommended by the producer.
II. EQUIPMENT AND ACCESSORIES (fig. 1a)
A – vacuum cleaner
A1 – suction vent A12 – exhaust micro-filter 1
A2 – lid A13 – exhaust micro-filter 2
A3 – lid lock A14 – exhaust HEPA micro-filter
A4 – button A15 – filter (adapter) holder
A5 – power cord winding button A16 – dust filter
A6 – button “-“ A17 – suction microfilter holder
A7 – button “+“ A18 – suction micro-filter 1
A8 – LED indication panel A19 – suction micro-filter 2
A9 – handle A20 – dust bag fullness light
A10 – power cord indication
A11 – exhaust grid
B – adapter for UniBag
B1 – filter head blocking lock
C – accessories
C1 – floor nozzle C6 – crevice nozzle
C2 – suction hose C7 – parquet nozzle
C3 – suction tube C8 – turbo brush
C4 – upholstery nozzle C9 – handle
C5 – brush C10 – accessory holder
GB
24 / 45