EXCALIBUR 740D Phantom Force Electronic Chess Set - Manual (Page 17)

17
If a piece has been captured, it will display the letter S (for side) next to its color
letter along with its capture area coordinate. For example, if a White Pawn has been
captured, it will verify as being on WS J8.
To exit verifi cation mode, press the WAKE/CLEAR key.
USING SETUP MODE
At any time during a game when it is your move, you may change the position on
the board by adding a piece, removing a piece, or changing any of the pieces–for
example, from a Queen to a Knight.
Removing A Piece
Press the SETUP key. Then on the chessboard, press the square the piece is on and
then the correct oval in the Capture Area on the left side or right with that piece’s
image and color. Press CLEAR to continue the game.
Adding or Changing a Piece
Press the SETUP key. To add a piece, press the oval of the piece in the captured
piece area. Next, press the empty square on the chessboard where you want the
piece to be. If you want to change a piece, fi rst move it off the chessboard onto the
correct oval in the Capture Area, then add the different piece type from the Capture
Area to the empty chessboard square. Press CLEAR to continue the game.
Setting Up Special Positions
This is another terrifi c feature that allows you to solve problems that you see in
magazines or newspapers, or that you make up yourself. It also allows you to
Capture Area Capture Area