Fat Bagger 1002-9 GAS TANK DASH PANEL - Manual

1. REMOVE SEAT
2. REMOVE GAS CAP
3. LOCATE THE BOLT IN FRONT ON THE DASH AND REMOVE (SEE IMAGE A)
IMAGE A
4. LOCATE THE BOLT AT THE END OF THE DASH (UNDER THE SEAT) AND REMOVE
(SEE IMAGE B)
IMAGE B
5. REMOVE THE STOCK DASH
6. INSTALL BRACKET FROM OLD DASH ONTO NEW DASH (SEE IMAGE C)
INSTALLATION OF FBI DASH ‘09
PART # FBI-1002-9
138 EAST LINCOLN
CHARITON, IA 50049
641-774-7499
641-774-7505(FAX)
FATBAGGERS.COM
IMAGE C
7. PLACE NEW DASH ON THE TANK USING STOCK HARDWARE
8. INTALL GAS CAP AND SEAT
*NOTE* WE RECOMMEND USING PART# FBI-0703 FOR THE GAS CAP