Feelworld FPV-101A - Manual (Page 9)

8
● Menu operation：
① . PC Mode：
color
Press “ MENU” enter into OSD menu, use “ ► ”or“ ◀” button to select
“Color”，then press “ MENU” button to confirm. It enter into“Color”submenu
operation item, then use “ ► ” or “ ◀” button to select the option, after
selection then repress “ MENU” again to confirm, then use “ ► ” or“ ◀”
button to adust or select the parameters. After value setting, press “ MENU” to
confirm. Press “MODE” button to exit OSD menu.
※ Brightness: To adjust the brightness in the picture.
※ Contrast: To adjust the brightest and darkest ratio of the image, please
note the sense of picture when adjust, proportion too large or small, will
make the picture lose the color of showy.
※ Saturation: To adjust the brilliant of the picture.
※ Color Temp：In PC mode, the color temperature of the picture is
adjustable. After enter into （ Color）sub menu, press“►”or“ ” ◀
on the unit to select "Color Temp" submenu item, press “ MENU ” button
to confirm, then press “►”or“ ” ◀ button to select color temperature
9300 K, 7500K, 6500K or User. Then press “MENU” button to confirm.
When select “user”, the right corner of menu shows as below: