FiberPlex TDP User Manual
Page 7
Earth Ground Lug – Both for general safety reasons as well as improved functionality of some signals, a
positive Earth Ground is often desirable. The TDP provides a Ground Lug on the rear panel that connects
to the third pin of each of the six Phoenix™ connectors in the Power Harness, tying all TD modules in the rack
to Earth Ground.
Circular DC Power Connection – DC power entry for the unit. This is a standard DC connection for use
with the included DC wall power supply and feeds the Power Harness.
Power Harness with (6 each)
Phoenix™ Power Connectors – The TDP comes standard with a 6‐
position wiring harness. This
harness receives its power from a standard power adapter
(included) via a circular connector.
Connector Position Blanking Plates – These plates fill unused connector positions.
I/O Connector Positions – Input and Output connectors to the TD‐Units are provisioned here.
7
8
9
10
11
12