Flowserve 2564 Mixerpac User Manual
Page 16
16
jacking procedure must be continued until a complete release of the outer ring is
achieved.
3. Dismount shaft or draw off hub. Remove rust which may have formed on the
shaft in front of the hub.
4. Remove shrink disc from hub.
Cleaning and lubrication
Dismounted shrink discs do not have to be dismantled and relubricated before
remounting The shrink disc has to be cleaned and relubricated only if employed in
dirty environment.
Use a solid containing lubricant (paste) with a high content of MoS
2
and a coeffi-
cient of friction of µ = 0,04 to lubricate the conical surfaces as well as bolts.
Lubricant examples:
Molykote D-321 R (Bonded coating)
Dow Corning
Molykote G Rapid + Paste
Dow Corning
M Aema-Sol MO 84-K (Bonded coating) A.C.Matthes
Aemasol MO 19 P Paste
A.C.Matthes
12.2 Assembly drawing, parts list.
44388 Dortmund,
09-02-1996 BE/PL Rev. 0
05-13-1997 BE/PL Rev. 1
12-21-2001 DO
Rev. 2
03-11-2003 LI
Rev. 3
11-17-2003 FRI
Rev. 4
02-06-2004 FRI
Rev. 5
02-08-2004 LI
Rev. 6
01-27-2006 WOH Rev. 7
12-15-2009 LI
Rev. 8
05-07-2010 LI
Rev. 9