Flowserve 2564 Mixerpac - Manual (Page 6)

6
3.2 The copyright on these installation and maintenance instructions is the property of
FLOWSERVE. These installation and maintenance instructions are intended for the
assembly, operating, and supervisory personnel and contain regulations and draw-
ings of a technical character that may not, in full or in part, be copied, distributed,
used without authorization for competitive purposes, or given to others.
3.3 We point out that we accept no liability for any instances of damage or malfunctions
of the machine incurred through nonadherence to these installation and maintenance
instructions.
4.0 Transport, Storage
4.1 The MIXERPAC must be transported and stored in the unopened original packaging.
The storage site must be dry and free of dust. Influences through temperature or
irradiation must be avoided.
4.2 Parts or complete MIXERPACs that have been dropped or otherwise subjected to
heavy impacts during transport must not be installed. An inspection by FLOWSERVE
becomes necessary.
4.3 After a storage period of three years the MIXERPAC must be inspected for properties
as new. This applies in particular to the secondary seals and seal faces. We recom-
mend an inspection by FLOWSERVE.
4.4
!
If the machine is to be preserved with integrated MIXERPAC the preserving
medium must not impair the function of the MIXERPAC by e. g. fouling or hard-
ening or swelling the secondary seals.
4.5
The MIXERPAC must be transported with adequate tools, e. g. by using industrial
trucks or lifting devices.
5.0 Preparing for Installation
5.1
!
The MIXERPAC may be installed when there are no visible signs of damage to
the MIXERPAC. This applies in particular to the static faces of the MIXERPAC
flange, centrings and the static sealing elements.
!
Before installing, consult the specifications on the accompanying documents to
verify that the correct MIXERPAC has been installed correctly and is suitable for
the specified application. Do not exceed the design data.
!
Requisite for all assembly work are the installation drawing and parts list and the
tools and aids required for the assembly.
!
Dismantling the MIXERPAC is not permitted without the written consent of