Flowserve MSS - Manual (Page 18)

18
MIXERPAC. The MIXERPAC will be inspected and if repairable, a quotation will be
made for restoring it to ist original condition. Upon acceptance of the quotation, the
MIXERPAC will be rebuilt, tested and returned to sender.
11.
!
Replacement parts are to be ordered with the ID numbers given in the annexed
parts list.
11.3
!
A warranty is given only for the original replacement parts delivered by
FLOWSERVE. All parts of the MIXERPAC meet with high-precision dimensional
tolerances and are matched to one another. Only a part replacement as given in
the FLOWSERVE quality assurance documentation ensures smooth operation.
11.4
!
We expressly point out that original replacement parts and accessories not deliv-
ered by FLOWSERVE are not tested or released by FLOWSERVE. Under certain
circumstances therefore, using and / or installing such products may impair the
properties given in the MIXERPAC design and hence undermine the active and /
or passive safety. All incidents of damage incurred through the use of nonorigi-
nal replacement parts or appurtenances render all liabilities and warranties on
the part of FLOWSERVE void.
Please note that special manufacturing and delivery specifications exist for all parts
of our products manufactured or procured by ourselves, and the replacement parts
are always offered in accordance with the latest technology and with the most cur-
rent regulations and laws.
11.5 This product is a precision sealing device. The design and dimension tolerances are
critical to seal performance. Only parts supplied by Flowserve should be used to
repair a seal. To order replacement parts, refer to the part code and B/M number. A
spare backup seal should be stocked to reduce re-pair time:
 Insert S Set Screws
P Shaft Packing C Springs
G, G1 Gaskets 3 Seal Ring
6 O-ring P1, P Back up Rings
K, K1, K, K3 Screws
12.0 Annex
1.1 Assembly drawing, parts list.
44388 Dortmund, 01-17-010 LI Rev. 0