Flowserve MSS - Manual (Page 4)

4
.3
Damage may cause leakage in gaseous form. The hazardous effects correspond
to those of the product, and there may be hazard to persons or the environment.
The operator’s regulations concerning work safety, accident prevention, and pol-
lution for this plant section must be adhered to without exception.
.4
!
Components coming into contact with the leakage must be corrosion-resistant or
corrosion-proof.
.5
!
Mechanical seals must be decontaminated before they are sent to FLOWSERVE
for maintenance or repair.
.6
!
When employing elastomers of EP (ethylene-propylene) or butyl rubber, do not
use any grease or oil on a mineral basis as a lubricant.
.7
A loss, a re-establishment or a change of the power supply for the machine and /
or the barrier system may not impair the properties of the mechanical seal and /
or involves a risk of personal injury and / or considerable damage to property.
.8
Assigned protection devices from the machine manufacturer must be accordingly
arranged and may no cause additional endangerments. They must ensure the
necessary range for the accessibility to maintenance work to the mechanical seal.
.9
The electrical supply of the machine must correspond to the protection targets of
the Directive 006/95/EC.
No endangerments for persons and environment may proceed from a non electric
power supply.
3.0 General
3.1 All illustrations and details in these instructions are subject to technical alterations
that are necessary in improving the mechanical seal.
3. The copyright on these installation and maintenance instructions is the property of
FLOWSERVE. These installation and maintenance instructions are intended for the
assembly, operating, and supervisory personnel and contain regulations and draw-
ings of a technical character that may not, in full or in part, be copied, distributed,
used without authorization for competitive purposes, or given to others.
3.3 We point out that we accept no liability for any instances of damage or malfunctions
of the machine incurred through nonadherence to these installation and maintenance
instructions.