Flowserve Logix 520MD+ DD - Manual (Page 19)

DD User Manual - Logix® 520MD+ Series Digital Positioner FCD-LGENSF0013-01
© Flowserve Corporation
19
Set the limit at which the Actuator Cycles warning will show
full severity.
7.4.9.8 Actuator Cycles Hi Percent Warning
View the severity of the Actuator Cycles warning based on
the Start and End limits.
7.4.9.9 - Actuator Travel/Cycles Reset
Reset the actuator travel or cycle counter.
7.4.10 Bellows Travel/Cycles
View and adjust the limits for the bellows cycling and travel
warnings.
7.4.10.1 Bellows Travel
View the total bellows travel.
7.4.10.2 Bellows Travel Hi Start Limit
Set the limit at which the Bellows Travel warning will appear.
7.4.10.3 Bellows Travel Hi End Limit
Set the limit at which the Bellows Travel warning will show
full severity.
7.4.10.4 Bellows Travel Hi Percent Warning
View the severity of the Bellows Travel warning based on the
Start and End limits.
7.4.10.5 Bellows Cycles
View the total bellows cycles.
7.4.10.6 Bellows Cycles Hi Start Limit
Set the limit at which the Bellows Cycles warning will appear.
7.4.10.7 Bellows Cycles Hi End Limit
Set the limit at which the Bellows Cycles warning will show
full severity.
7.4.10.8 Bellows Cycles Hi Percent Warning
View the severity of the Bellows Cycles warning based on the
Start and End limits.
7.4.10.9 Bellows Travel/Cycles Reset
Reset the bellows travel or cycle counter.
7.4.11 Pilot travel/Cycles
View and adjust the limits for the pilot relay cycling and travel
warnings.
7.4.11.1 Pilot Travel
View the total pilot relay travel.
7.4.11.2 Pilot Travel Hi Start Limit
Set the limit at which the Pilot Relay Travel warning will
appear.
7.4.11.3 Pilot Travel Hi End Limit
Set the limit at which the Pilot Relay Travel warning will show
full severity.
7.4.11.4 Pilot Travel Hi Percent Warning
View the severity of the Pilot Relay Travel warning based on
the Start and End limits.
7.4.11.5 Pilot Cycles
View the total pilot relay cycles.
7.4.11.6 Pilot Cycles Hi Start Limit
Set the limit at which the Pilot Relay Cycles warning will
appear.
7.4.11.7 Pilot Cycles Hi End Limit
Set the limit at which the Pilot Relay Cycles warning will
show full severity.
7.4.11.8 Pilot Cycles Hi Percent Warning
View the severity of the Pilot Relay Cycles warning based on
the Start and End limits.
7.4.11.9 Pilot Travel/Cycles Reset
Reset the pilot relay travel or cycle counter.
7.5 User Preferences
View and set user preferences such as date, interface lock,
and units.
7.5.1 View/Set Date and Time
View and set the positioner date and time.
7.5.2 Local Interface
Lock the local interface of the positioner and set a pin code.
Locking the local interface prevents unauthorized changes
from taking place at the positioner's button panel that affect
the control or configuration of the positioner.
7.5.2.1 Local Interface Enable/Disable
Lock the local interface so that no adjustments can be made
to the control or configuration of the positioner using the
buttons on the positioner without a pin code. The gain switch
will still be responsive.
7.5.2.2 Pin Code
Set a pin code to allow access to modify positioner control
and configuration parameters at the positioner's local
interface.
7.5.3 Select Units
Set desired units.
7.5.3.1 Area Units
Set area units (in2, cm2)
7.5.3.2 Travel Units
Set travel units (%)
7.5.3.3 Pressure Units
Set pressure units (psi, bar, kg/cm2, kPa)
7.5.3.4 Force Units