Flowserve Limitorque QXM Linear Base User Manual
Page 2
MXa/QXM Linear Base FCD LMENIM2315-00 – 6/14
2
Contents
1
Subassembly Instructions
3
1.1 LB Subassembly, QXM and MX Units
3
1.1.1 Optional LB Subassembly Removal From QXM and MX Units
3
1.1.2 Optional LB FA or EN (F) Base and Stop Nut Subassembly
4
1.1.3 Removal of Thrust Base Subassembly From LB Assembly
5
1.1.4 Disassembly of LB Subassembly
6
2
Reassembly Instructions
7
2.1 LB Reassembly
7
2.1.1 Reassembly of Optional LB Subassembly
7
2.1.2 Reassembly of Thrust Base to LB Subassembly
8
2.1.3 Reassembly of Optional FA/EN (F) Base to LB Subassembly
8
2.1.4 Assembly or Adjustment of Optional Stop Nut for LB Subassembly
10
2.1.5 LB Lubrication
11
2.1.6 Reassembly of QXM or MX Actuators to LB/Thrust Base Assembly
11
Figures
Figure 1.1 – LB Subassembly Removal From Actuator
3
Figure 1.2 – Optional LB FA/EN (F) Base and Stop Nut Subassembly
4
Figure 1.3 – Thrust Base with LB Assembly
5
Figure 1.4 – LB Assembly
6
Figure 2.1 – LB1 Subassembly Cross-Section
9
Figure 2.2 – LB2 Subassembly Cross-Section
9
Tables
Table 1.1 – Optional LB1 and LB2 Subassembly
4